BMQZD - CONDUCTALLOY WITH SILVER, 52064

  • MSDS: BMQZD
  • Manufacturer: PREMIER INDUSTRIAL CORP
  • Product Name: CONDUCTALLOY WITH SILVER, 52064
  • National Stock Number: 3439-00N025504
Product Identification

Product ID:CONDUCTALLOY WITH SILVER, 52064
MSDS Date:07/26/1988
FSC:3439
NIIN:00N025504
MSDS Number: BMQZD

Responsible Party
PREMIER INDUSTRIAL CORPORATION
4500 EUCLID AVENUE
CLEVELAND, OH 44103
US

Emergency Phone: 216-391-8300

Info Phone: 216-391-8300

Preparer: G.F.S.

Cage: 18399

Contractor
PREMIER FARNELL CORPORATION
CLEVELAND, OH 44103-3736 US

Telephone: 216-391-8300

Cage: 18399

Ingredients

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: >60%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3


LEAD

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: >30%

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.15 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


SILVER

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: <5%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


(RAT)5000 MG/KG.

CAS: 8050-09-7

Fraction By Weight: <5%

OSHA PEL 0.1 MG/M3 (MFR)

ACGIH TLV: 0.1 MG/M3 (MFR)


CASES OF LEAD INTOXICATION WILL NOT OCCUR.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:SEE INGREDIENT 4.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE IRRITATION.
CHRONIC:RESPIRATORY SHORT TERM OVEREXPOSURES TO FUMES MAY RESULT IN
DIZZINESS, NAUSEA OR DRYNESS/IRRITATION OF NOSE, THROAT, EYES OR
RESPIRATORY SYSTEM. CHRONIC EXCESS FUMES ABOV E PEL OR TLV MAY
AFFECT EYES, NASAL & SKIN. MAY CAUSE IRRITATION OF SKIN.
HARMFUL/FATAL IF SWALLOWED. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:LEAD:GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ:EXPERIMENTAL TERATOGEN. MAY CAUSE
BIRTH DEFECTS. EXCESS DUSTS AND FUMES ARE INHALATION HAZARD TO
LUNGS & KIDNEYS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:IMMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN &
CALL MD. SKIN:WASH THOROUGHLY W/PLENTY OF WATER & SOAP.
INHAL:REMOVE TO FRESH AIR, GIVE OXYGEN & CALL MD. INGEST:SEEK MD
IMMEDIATELY. SHOW MSDS OR LABEL, INDUCE VOMITING.

Fire Fighting

Extinguishing Media:WATER, FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CONTACT W/FLAME OR HOT SURFACES MAY
PRODUCE TOXIC GASES.

Accidental Release

Spill Release Procedures:CLEAN UP WITH ABSORBENT MATERIAL. CONTAIN AND
PICK UP WASTE MATERIALS. PUT IN SEALED, APPROVED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP IN COOL PLACE. ARC, SPARK & FLAME
COULD BE SOURCE OF IGNIT FOR COMBUST MATLS. AVOID CNTCT W/EYES &
SKIN. DO NOT TAKE INTERNALLY.
Other Precautions:CNTCT W/FLAME/HOT SURFS MAY PRDCE TOXIC GASES.IN CASE
OF ACCIDENT/ILLNESS, GET MD IMMED. SHOW LABEL/MSDS. KEEP AWAY FROM
FOOD,DRINK,TOBACCO PRODS & ANIMAL FEEDS. KEEP OUT OF REACH OF
CHILDREN.KEEP ONL Y IN ORIGINAL LABELED CNTNRS.(SUPP DATA)

Exposure Controls

Respiratory Protection:WEAR NIOSH/MSHA APPROVED HOOD, RESPIRATOR OR
SUPPLIED AIR MASK.
Ventilation:MECHANICAL/LOCAL, 60 FPM REQUIRED. SPECIAL:ANSI Z49.1.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING.
Supplemental Safety and Health
OTHER PREC:DO NOT EMPTY INTO DRAINS.ALWAYS READ & FOLLOW DIRECTIONS ON
PROD LABEL.FOR PROF & INDUS USE ONLY.MOLTEN LEAD ALLOY SOLDERS
CONSISTING OF TIN DO NOT PRDCE SIGNIFICANT QTYS OF FUME BELOW 600F
.WHEN AIR OF WORK ROOMS REGULARLY CONTAIN NOT MORE THAN 50UG/M3 OF
INORG CMPDS AS MEASURED BY PRESCRIBED METHODS.(ING 5)

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:400F,204C
Solubility in Water:NIL
Appearance and Odor:SILVER GRAY WIRE, ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Hazardous Decomposition Products:ACETONE, CO, ACIDS, FORMALDEHYDE.
COMBUSTION PRODUCTS:OXIDES OF SN, PB, AG, C.

Disposal

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.